Sale!

32 WC 8 cavity AL mold

91.05$ 81.95$

-10%
  • Cast .314 cal.  – 98 grain solid
  • Steel sprue plate
  • Hardened steel alignment pins
  • Allen keys included
  • RCBS/Lyman top punch included
  • Use LEE 6 cavity handle or MP mold handles (NOT included)

See our product pictures in gallery

(43 customer review)

9 in stock

This item is selling fast!

Free worldwide shipping on all orders over 399€

Guaranteed Safe Checkout
Satisfaction guaranteed, secure ordering, Visa, Mastercard, Maestro, Discover

.32 Wadcutter Bullet Mold, 98 grain – 8 Cavity Aluminum

An 8-cavity aluminum mold for a 98 grain solid .32 wadcutter, cast at .314″. A good match for .32 S&W Long and .32 Long Colt target loads, and eight cavities make high-volume casting quick.

Specifications

  • As-cast diameter: .314
  • Weight: 98 grains, solid wadcutter
  • 8 cavities, aluminum
  • Steel sprue plate, hardened steel alignment pins
  • Allen keys and RCBS/Lyman top punch included
  • Use LEE 6-cavity handles or MP mold handles (not included)

See our product pictures in the gallery.

Additional information

Brand

Caliber (As cast)

Handles included?

Material

Number of cavities

43 review for 32 WC 8 cavity AL mold

  1. Juan Viel Meliá –

    Hello, in relation to your question I have to tell you that in my case the mold does not work correctly since there are two holes in the mold that are very difficult to empty, you have to hit the exterior with great aggressiveness with the wooden hammer, the rest of them come out well, therefore my experience is not good, the mold is not correctly finished or checked.

  2. mats forsell –

    Super Nice!

  3. Ken Moon –

    Hi love the mold BUT i had to modify it because it was making the projectile off centre had to put another lock guide in it to keep it strait
    Ken thanks

  4. Rolf –

  5. Florian Wilkening –

    Super. Wie immer. Absolut genau gearbeitet. Super zum gießen. Kann ich nur empfehlen.

  6. Barry M. –

    High quality, great service ,fast delivery

  7. Robert –

    Good and precise balls, but the small flange in the front and rear edge is very difficult and get good.

  8. Paul C. –

    A little more difficult to pop out of mold because of the thinner base flanges, but what a great bullet for the .32 mag.

  9. ottini paolo –

    Fondipalle ottimo per costruzione e dimensioni , permette una buona produzione in poco tempo. Usando lega di piombo quasi puro le palle escono a 313″ , personalmente coloro con polvere a secco e trafilo poi a 314. Usata in semiauto Benelli fornisce ottime rosate .

  10. ottini paolo –

    Ottimo prodotto e spedizione veloce. Utilizzando piombo quasi puro ho ottenuto un peso della palla di 102 grani circa a 313″, colorando con plovere , trafilatndo a 314 ed usando una semiauto Benelli ho avuto ottime rosate.

  11. Anonymous –

    Ottimo stampo, nessun problema di utilizzo, con piombo quasi puro ottengo palle di 313″ che coloro a polvere e trafilo a 314″.

  12. Jim T. –

    Using a eight cavity mold is awesome for production casting Especially when they are 32 caliber slugs so you get so many from so little lead.

  13. Jonas Wiberg –

    Excellent mould with exceptional quality. Perfect from the first cast. Have not discarded a single bullet. Extremely fast delivery.

  14. Martin K. –

    Unbelievable speed of production.

  15. Kent P. –

    Good quality, nice design only problem is quick wear at spure plate anchor point.

  16. Dan Evander –

    Works great, save me a LOT of time

  17. Enrique Martin de Vidales –

    Everything perfect, fast and well packed. Perhaps a better illustration of the assembly and putting into operation of the molds and gripper.

  18. Ramón Soler Alabor –

    Buena calidad y entrega muy rápido

  19. Vicente –

    Very good mold. Bullets are very uniform, with sharp corners and weights in a range of 0,1 gr

  20. Barry John SMITH –

    Overall – verry pleased, top finish on mold allowing projectiles to drop free, finish on countersinks of sprue plate need improvement to allow sprue to release easily.

  21. Tomas S. –

    Just perfekt!

  22. Scott W. –

    Great mold, accurate bullet

  23. Erik –

    Beautiful mold in a style hard to find — Thanks!

  24. glen hoglin –

    If the shipping was any faster, I’d have to be next door. I ordered it on the 2nd of January and had it on the 7th. The mold itself is the usual work of art. I hope to finally get to put it to use this weekend.

  25. Luis Alonso Redondo –

    Super

  26. Martin K. –

    Great mold

  27. Norman E Annis –

    Another great mold. Finally got some loaded and they shoot great in my K 32. Happy to find this one as wad cutter molds for 32’s aren’t easy to find. With the 8 cavities I can really crank them out. Same incredible shipping 3-4 days.

  28. Kurt F. –

    I get what i order, and shipping was very fast. I will order more from MP-MOLDS

  29. William T. –

    This and all mp molds are top notch! The quality of the materials and the machine work to make the mold are amazing. The shipping time was also lightning fast! I had my mold 4 day after I ordered it.
    I will definitely purchase more!

  30. Ronald –

    Bullets are beautiful, but hard to release from the mold. Might be because of the large lube area. Pleased with fast shipping and quality of mold, but with #2 alloy hard to release all rounds.

  31. Ernest –

    Excellent craftsmanship

  32. Víctor Manuel Cando Casado (verified owner) –

    Seria muy interesante que contestaran los correos, consultas y dudas que se les hace llegar, mejoraría mucho la calidad final del producto.

  33. Piet Vanoutrive (verified owner) –

    Looking very promising, I still have to start it up!

  34. Micheal (verified owner) –

    Another great mold ! Almost to nice use. It will make a nice pile of wadcutters in no time.

  35. Víctor C. (verified owner) –

    It would be a nice touch and a great way to show customer service and after-sales support if you would reply to emails with inquiries and requests for spare parts.

  36. Kym (verified owner) –

    I thought 8 cavities would be more productive but it’s hard to control the pour when the holes are very close together. Maybe 4 or 6 would be better if holes further apart

  37. ELiano Cattarin (verified owner) –

    Ordine arrivato il giorno dopo, ottimo, lo stampo e ben fatto e le palle sono molto precise, si vede che fate molto bene il vostro lavoro, grazie

  38. Jeremy Cates (verified owner) –

    Pretty versatile bullet doesn’t care if loaded sprue side or not, came well packed and very quick delivery

  39. John Enger (verified owner) –

    It’s a work of art!

  40. Marc Gilet (verified owner) –

    It’s a very good bullet with excellent grouping potential. That said, my problem is that I can’t seem to lubricate it using my RCBS LubaMatic press, because the lube fills the first crimp groove, making the bullet no longer reversible. I think I’ll switch to the “Alox” method instead…

  41. James (verified owner) –

    First class quality with speedy shipping!

  42. Bengt Jansson (verified owner) –

    Lätt att gjuta med, kulorna släpper lätt. Lite svårt låsa mutter på plattan så den tätar mot formen.

  43. Peter Olsson –

    A very well-made mold that casts good bullets.

Add a review

Your email address will not be published. Required fields are marked *