Additional information
| Caliber (As cast) | .312, .314, .316 |
|---|---|
| Handles included? | No |
| Material | Brass |
| Number of cavities | 4 cavities |
| Pb-Bb-Gc-Hb | Hollow base |
MP 32 HBWC 4 cavity mold (.312, .314 or .316 diam.)
MP 32 HBWC 4 cavity mold (.312, .314 or .316 diam.)
124.26$
- Cast 98 grain hollow base wad cutter
- Choos your as cas diameter (.312, .314 or .316)
- Round and Blank pins included
- Steel sprue plate
- Hardened steel alignment pins
- Allen keys included
- RCBS/Lyman top punch included
- Use LEE 6 cavity handle or MP mold handles (NOT included)
Description
- Cast 98 grain hollow base wad cutter
- Choos your as cas diameter (.312, .314 or .316)
- Round and Blank pins included
- Steel sprue plate
- Hardened steel alignment pins
- Allen keys included
- RCBS/Lyman top punch included
- Use LEE 6 cavity handle or MP mold handles (NOT included)
Kirby Branham (verified owner) –
Great mold – top notch quality!
Anonymous (verified owner) –
awesome hollow base mold
MAZIER J. (verified owner) –
Moule de très bonne facture en laiton, démoulage facile, livraison très rapide, je recommande
David G. (verified owner) –
Using the 0.316 bullet unsized, lubed with Lee liquid Alox, in longer than normal cases, seated to 1.490″ OAL in a BSA Martini Cadet rifle. The results are out standing.
Mattias (verified owner) –
Really well organised order handling and dispatch. The mold was well wrapped and protected. The workmanship quality was excellent. I cleaned and heat treated the mold according instructions on the web site. made the first 250 bullets by using a hot plate an 390 C lead. There were only limited sticking of bullets to the HB pins, without graphite treatment. Most bullets were fine early in casting, but I did not stop to look :-). The bullets came out as about .315”, but no good statistics to report.
The only complain I have is the weight in comparison to aluminium molds, but the good result compensate for the heavier handling.
I strongly recommend the mold!!