Additional information
| Brand | |
|---|---|
| Caliber (As cast) | .311, .314 |
| Handles included? | No |
| Manufacturer | |
| Material | Brass |
| Number of cavities | 2 cavites, 4 cavities |
| Pb-Bb-Gc-Hb | Gas check, Plain base |
314 (311)-140 SledgeHammer mold, HP (multi choice)
314 (311)-140 SledgeHammer mold, HP (multi choice)
69.03$ – 103.12$
- cast .314 diam. or .311 diam. with wheel weights alloy (may vary – depends on alloy) – choose your caliber
- HP Small 138 grains, Large 135 Grains
- 141 grains solid
- 0.400″ meplat to crimp groove
- for heavy duty 32 magnum loads, 32-20’s and the new 327 Federal. Shows utility in the 300BO, 30-30, 30 Carbine and 308 and 30-06 Plinkers
- Steel sprue plate
- Hardened steel alignment pins
- Allen keys included
- RCBS/Lyman top punch included
- Use LEE 6 cavity handle or MP mold handles (NOT included)
See our product pictures in gallery
Description
- cast .314 diam. or .311 diam. with wheel weights alloy (may vary – depends on alloy) – choose your caliber
- HP Small 138 grains, Large 135 Grains
- 141 grains solid
- 0.400″ meplat to crimp groove
- for heavy duty 32 magnum loads, 32-20’s and the new 327 Federal. Shows utility in the 300BO, 30-30, 30 Carbine and 308 and 30-06 Plinkers
- Steel sprue plate
- Hardened steel alignment pins
- Allen keys included
- RCBS/Lyman top punch included
- Use LEE 6 cavity handle or MP mold handles (NOT included)
See our product pictures in gallery
Great Mold!
wonderful workmanship
As usual first class craftsmanship and attention to detail.
Wonderful mold, should be great for hunting
The .311 sledgehammer mold drops good looking large cavity hp slugs that weigh between 131-132 grains using wheel-weigh lead. I am shooting these out of a AirForce .308 air rifle. Full power yields 968 fps which is enough for the slug to expand to .62 caliber when fired into water. With velocity tuned down to 928 fps, I get 3 shots grouping well under 2” at 100 yds.
The only observation to note is the hollow point pins require a gentle tap to extend and drop the bullets. This could simply be a break-in condition as I’ve only had two casting sessions and maybe 400 bullets so far. Also, it could be me as this is my first hollow point mold. All in all, very happy.
Video links below for ballistic performance & accuracy. Again, these are being shot from an air rifle & not a firearm. Fire arm testing will come later.
Would I recommend? Absolutely!
Would I buy more? Absolutely!
But You be the judge…..
MP-Molds .311 – 130 GRN HP AirRifle Test
https://youtu.be/6jfPL1xV5Y0
MP .311 HP Sledge Hammer Cast Bullet 100 Yard Accuracy – Air Rifle
https://youtu.be/plfHAxo31Cs