- This topic has 1 reply, 1 voice, and was last updated 2 years, 10 months ago by Pat Trimble.
Viewing 2 posts - 1 through 2 (of 2 total)
Viewing 2 posts - 1 through 2 (of 2 total)
- You must be logged in to reply to this topic.
Forum › General › General forum instructions › MP 359-125 HP PB 4 Cavity NO LUBE GROOVE Mold
I just shot some bullets I cast in the 359-125 Hollow Point mold. I used the penta-pin. The finished and coated bullets weighed 137 grains. I used 5.3 grains of Ramshot True Blue and got 1055 FPS from my CZ75. I shot into a stack of milk jugs filled with water. The bullets expanded from .355 to .477 and retained 100% of their mass.