Lubricating Mold pins with Loctite 767

Forum › General › General forum instructions › Lubricating Mold pins with Loctite 767

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • 03/03/2022 at 03:22 #37381
    Michael Arroyo
    Participant

      If you experience your mold pins are binding after repeated use.  I have been lubricating the pins with Loctite 767 Anti-Seize thread compound.

      Just apply a little compound to the pins and they slide without binding.  The compound is rated to 870 degrees Celcius.

      Cheers, Mick.

       

       

      17/12/2024 at 09:21 #50003
      BlackDragonSpeer
      Participant

        Thank you, Michael! I was looking for the lube it said would come with the moulds. Been wondering what would work (not Ballistol) and you just made it much more simple.

      • Author
        Posts
      Viewing 2 posts - 1 through 2 (of 2 total)
      • You must be logged in to reply to this topic.