9mm 135 flat round nose flat base mold 357/359-135 Flat Round Nose, Flat base, 8 Cavity AL No Lube Groove Mold 97.51$ (excl. VAT)
41 hammer hollow point mold 41 Hammer, 4 cavity HP mold (multi choice) 145.68$ (excl. VAT)
Sale!

356/359-125 Flat Round Nose, Flat Base, 8 Cavity AL No Lube Groove Mold

97.51$ (excl. VAT)

-20%
  • cast .356 to .359 diam with wheel weights alloy (may vary – depends on alloy)
  • 125 grains solids
  • for use in 9 mm, too.
  • Steel sprue plate
  • Hardened steel alignment pins
  • Allen keys  included
  • RCBS/Lyman top punch  included
  • Use LEE 6 cavity handle or MP mold handles (NOT included)

See our product pictures in gallery

(117 customer reviews)

Free worldwide shipping on all orders over 399€

    Guaranteed Safe Checkout

    • cast .356 to .359 diam with wheel weights alloy (may vary – depends on alloy)
    • 125 grains solids
    • for use in 9 mm, too.
    • Steel sprue plate
    • Hardened steel alignment pins
    • Allen keys  included
    • RCBS/Lyman top punch  included
    • Use LEE 6 cavity handle or MP mold handles (NOT included)

    See our product pictures in gallery

    Additional information

    Brand

    Caliber (As cast)

    , , ,

    Handles included?

    Material

    Number of cavities

    Pb-Bb-Gc-Hb

    117 reviews for 356/359-125 Flat Round Nose, Flat Base, 8 Cavity AL No Lube Groove Mold

    1. Leonard S. –

      great mold fantastic shipping if you will make a 10 cavity I will buy it

    2. DANIEL L L. –

      Shipping is very fast, event to South América. Excellent manufacturing quality and works efficiently. Very satisfied. Congratulations.

    3. Gergely Halasi –

      I really like the shape of the bullet. I use 2% tin 6% antimony for the alloy, so for me a bullet comes out of 120 grains. The only negative is that some small screws broke after 10,000 pieces

    4. Dale K. –

      Very nice mold, fast production, very precise, bullets just fall out!.

    5. Jeremy –

      This is a great mold, I highly recommend it to anyone. It casts perfect bullets every time, and shipping was super fast only took 6 days from Europe to the US.

    6. Robert D. –

      Extremely fast shipping. Great mold, love the hollow point pin setup!

    7. Juha –

      Great value for the money.

    8. Robert T. –

      Running two molds you can make a lot of bullets very quick – all weigh within 0.5 grains and measure the same – and all drop very easily from Molds – and with no lube groove – they coat very easily with hi-tek bullet coatings

    9. Nick K. –

      Great mold. Cast great bullets. Drops them to size. Looking to order a hollowpoint molds in 9mm and 45.

    10. Jack –

      high quality

    11. Birt –

      Great mold! Bullets fall right out of the mold and the design is great. This is my new go to bullet for my CZ pistols.

    12. Clay Mathews –

      These molds are absolutely Perfect! I have about 96 different molds from all different manufacturers and these molds are some of the very best that I have owned! Keep up the great work!

    13. Börje Lilja –

      Work very good

    14. Michael C. –

      Well made mold, with preheating, it produced good bullets on the first throw.

    15. Mikael Ö. –

      Great quality, bought 2 molds and with 8 cavitys it produces alot of bullets. Will buy more molds when they are back in stock.

    16. Richard Leach –

      Great mold, casts flawless Bullet’s

    17. Brandon –

      After 4 different 9mm molds, I finally found one worth my time. This mold drops perfect bullets. Each cavity drops the bullets as soon as you open the mold. Very durable construction. Quality hardware. The mold handles are much better than the competition. Recieved mold within 4 days!

    18. Anonymous –

      Product is exactly as expected a shipping was amazing will definitely make more purchases here

    19. Daniel –

      MP MOLDS won’t return emails unless they want a review.

    20. Nick K. –

      this is the second time i bought this mold. its predecessor cast great bullets. now when one gets too hot i will switch out to second mold

    21. Anonymous –

      Rainig bullets. Excellent

    22. Boris S. –

      The shipment was sent promptly and on time. The workmanship of this product is great, so I can recommend to everyone that this product is worth the price it sells. I will definitely buy again products from MP-Molds in the future.

    23. Frederich C Eicker –

      Absolutely Brilliant, fast efficient service, great quality product. As soon as they have stock in the mold I want, I am buying my second MP mold.

    24. Lester –

      I will definitely be ordering more, I just wish I had ordered more a long time ago.

    25. Mark W. –

      This mold was exactly what I needed. Beautiful workmanship. Thank you.

    26. Garrett –

      Mold looks clean! I haven’t had the chance to use it yet but shipping was AMAZINGLY fast!

    27. Kenneth Holiday –

      Beautiful machine work. Throws perfect bullets. It is a pleasure to use.

    28. Michael G. –

      Solid choice and fast to ship. Thank you again.

    29. david –

      Amazing product and super fast shipping

    30. Kelby J. –

      Great mold! It throws accurate projectiles and lots of them at a time. I’ve used them for a Springfield and Sig 9mm pistol without any issues!

    31. Troy holder –

      Have not got to try the mold yet, but it is a beautiful piece of craftsmanship for sure. Hoping this bullet will work well in my CZ pistols. Shipping was extremely fast

    32. John L. –

      The mold cast quality bullets that drop from the mold very easily. I have several molds from MP and they are all works of art.

    33. Max –

      Great mold!
      It just rains out piles of good bullets in short order. Works great in 38/357 as plinker bullet and is also at home in 9mm very accurate and shoots to the sights on my 9mm pistols.

    34. Anonymous –

      Great product and service!

    35. Domenick Lamanna –

      after cleaning this mold cast perfect bullets right out of the box suits my need perfectly

    36. Constantine M. –

      Delivered promptly and the quality of the mold is great.

    37. Patrizio F. –

      high quality mold and fast shipping

    38. Bill –

      I doesn’t take long to cast a pile of bullets from this mold. The cavities are so smooth and with no lube groove the bullets fall out easily, not necessary to do a lot of whacking. Being 8 cavities I have to run the lead hotter than usual to keep it producing.

    39. David Sherman –

      Beautiful workmanship, and a joy to use.

    40. Joe Hanna –

      Great mold even better company

    41. charles kauffman –

      As usual this mold is great! My favorite bullet molds to use. The 8 cavity molds let me make hundreds of bullets in very little time. They always come out flawless once you get up to temp. Machined masterpieces!

    42. ANDREW S. –

      Great mold, finishes at exactly 125 gr every time.

    43. Anonymous –

      Great craftsmanship!

    44. larry white –

      great molds cast perfect after a few rounds
      i have ordered 2 molds and my lady michele has ordered 2 molds for presents
      all has been good except now i was charged 70.55 plus17.31shipping a total of 87.86
      the transaction went thru as 106.71 which is 29.15 over the purchase price .
      i plan on purchasing another mold or two and if you could check out this error and maybe credit my account that would be fine the bank transfer was on 2/19/2021
      also my partner ross seymour also orderded a mold and i have been using his also the production with using 3 9mm molds 115/125 and the 200 45 acp mold my production has been great
      thanks for a great product
      if this is not a place i should have called please inform me and then call the correct person customer service etc.
      thanks again
      larry

    45. John T. –

      Excellent mold. Faster shipping than most companies in the US.

    46. James R. –

      super fast delivery and exactly as described and ordered

    47. Jan Iben Wang Windt –

      Did the job flow less.

    48. Jim Webster –

      Works great and fast shipping

    49. Joe –

      Awesome mold… super fast delivery!!

    50. Anonymous –

      Great quality

    51. John H. –

      A quality mold and fast service.

    52. Anonymous –

      Parfait

    53. Darrin Reeder –

      Outstanding as always

    54. Ryan K. –

      This 8 cav casts a bit different than the rest of my lower cavity molds. This is to keep the the bases from smearing, make sure to check that when you open your sprue plate. Once I had it figured out, it was dropping beautiful bullets quick and in a hurry. They coat, size, load, and shoot very nice. Very happy.

    55. Daniel A. –

      Fast shipment. Product as advertised. Quality molds.

    56. Michael S. –

      Very high quality as always with fast shipping at a good price. I think I am up to around 20 or 25 MP Molds now in all different calibers. I have been very pleased with every single one of them. This one is no different and with 8 cavities it will drop a lot of bullets fast.

    57. Rogelio M. –

      Amazing mold! Much better than any other brand I’ve tried! The sprew handle kept coming off but after hammering and gluing it into place its solid as a rock.

    58. Paul R. –

      Perfect experience with MP. From point of order, had the mould in 4 days, well packed and in perfect condition. Easy to break-in and a pleasure to use.

    59. benjamin p. –

      Great quality aluminum mold with great attention to detail. Ships incredibly fast to me. Just wish it came with handles.

    60. lester harris –

      Nice product. Quick shipping. Cannot wait to try it out.

    61. Maciej T. –

      Very good mold and fast delivery.

    62. damien c. –

      Tout simplement parfait, juste un peu lourd à manipuler.

    63. Bret Adams –

      Nice Mould!

    64. Aubrey Plein –

      Great mold. Drops easily, bullet quality excellent. Most satisfied.

    65. Anonymous –

      Excellent mold

    66. Dmitry P. –

      Great mold! I have one in 135gr 8 cavity also. I noticed the sprue plate when you close it sometimes hits the edge of the cavity creating a nick. I managed to make one just opening and closing on brand new mold, so I took the sprue plate and rounded the the edge of sprue plate on the belt sander and its perfect now. Casts beautiful bullets with minimal rejects. I casted 20lb of bullets in short time!

    67. Brett Brown –

      First I would like to say the service is phenomenal. I placed the order and within 6 minutes, I had a Fed Ex tracking number. The mold went from Slovenia, to Austria, to France, to London, to the U.S., to my front door in New Jersey in a week.
      The mold is obviously made with great pride. When I received it, I cleaned it and then went over it with a 30x loop. The mold is flawless. I didn’t realize it at the time of ordering it, but it even comes with a top punch. It was packed well and I wouldn’t even think twice about recommending M-P. I will be doing business again for sure.
      Thank you for your prompt service.

    68. Brett Brown –

      Service was phenomenal. At my door in 6 days (U.S.A.). Mold cast great. I was so impressed, I went back and bought one for 45 acp.

    69. Mason –

      Easy mould to fill. Feeds great into all my 9mm pistols at normal OAL

    70. Kenneth Koch –

      Very impressed, drops nice bullets right away. did not even smoke the mold yet. super fast shipping too. 100% A+++!

    71. Kent P. –

      Good quality, nice design only problem is quick wear at spure plate anchor point.

    72. Dan Evander –

      Works great. No ptoblems

    73. Adam –

      Fast and on point

    74. Pat Trimble –

      This was my first MP mold. I can not recommend these molds highly enough. Beautifully designed and made. The fit and finish is outstanding, easily equal or better than molds costing twice as much. With the 8 cavity design you can crank out more bullets than you can use in no time. This particular bullet is a nice, straightforward design for basic target shooting and plinking. Seems to shoot well in every 9mm I have fed it too, including an assortment of handguns and carbines. I will be buying several more molds from MP soon.

    75. Philippe BERNARD –

      Some difficulties to properly fill the 8 cavities. The cones are not wide enough and are not joined. I will try to do a machining; but the steel looks pretty hard … The aluminum part is perfect.

    76. Ernst D. –

      Top Qualität, schnelle Lieferung

    77. Anonymous –

      Second time around for me and this mold. I abused the first one I bought enough that now that I have my casting game figured out better, it was time to start fresh with a new one.

    78. Rick L. –

      Very impressed with this mold, with 8 cavities I could use a bigger melting pot to keep up with it. The service was great, fast shipping.
      Thank you for such a great product

    79. larry white –

      GREAT MOLDI HAVE 6 MOLDS NOW I ORDERED SOME AND MY PARTNER ROSS SEYMOURAND MY WIFE ORDERED AND THEY ARE GREAT WILL ORDER MORE
      ONLY PROBLEMIS I WAS VOERCHARGED AND COULD NEVER GET IT SATISFIED IT IS ONLY ABOUT 25 DOLLARS BUIT THINGS LIKE THIS MAKE CUSTOMERS GO TO OTHER VENDER
      TRY AND KEEP UP THE GOOD WORK
      LARRY WHITE

    80. Maciej –

      looks very good like for alloy one

    81. Robin H. –

      Top quality mold. I’ve had it for a couple of weeks and already casted about 4000 boolits. Runs perfect in my CZ S2 with Hi-tek coating.

    82. Joshua A. –

      Fantastic products at a reasonable price!

    83. Ridwaan A. –

      Alluminum not as strong as brass
      However,still a great mold

    84. Gary U. –

      Excellent service and mold!

    85. Fritz Walter –

      Best mould i ever bought

    86. Charlie A. –

      Great mold and fast shipping.

    87. christophe barbier –

      the perfect mold in .356 with powder coating no recalibrate after veri nice acuracy

    88. Rob I. –

      Made a pile of bullets with this one very quickly. No sticky cavities or other issues. Very pleased with the quality and performance of this mold. Incredibly fast shipping!

    89. Robert Somers –

      Great mold; extremely fast shipping.

    90. Štefan H. –

      Super express delivery. Excellent quality of goods. Well thank you.

    91. Lloyd S. –

      Great company, quality product. Also, ordered two other molds.

    92. Frank P. –

      Sehr gute Gießkokille, funktioniert einwandfrei. Die Lieferung war sehr schnell. DANKE

    93. Charlie R. –

      This is a top Class product, and i love it….

    94. Michael P. –

      A work of art !! Casts perfectly

    95. Jan K. –

      Super!!!

    96. Jan K. –

      Good quality for a decent Price, Fast transaction

    97. Anonymous –

      Excelent moulds

    98. Radovan L. –

      Best 9mm moulds I’ve ever had.

    99. Jason –

      This mold is wonderful compared to the other manufacturers that I have used in the past. Less lead sticking to the molds and well as the consistency from one cavity to the next. I am very happy with my purchases.

      Jason

    100. christophe barbier –

      Hello the perfecr mold for my pcc with power coating testing range 100 meter

    101. Jean-Christophe SANCHEZ –

      C’est mon premier moule en aluminium avec 8 cavités et je dois dire que je suis agréablement surpris par la facilité d’utilisation. Ce moule a les mêmes qualités que ceux en laiton avec une production X par 2. Quant à MP-Mold, ce sont des vendeurs sérieux, professionnels et réactifs.
      This is my first aluminum mold with 8 cavities and I must say that I am pleasantly surprised by the ease of use. This mold has the same qualities as those in brass with a production X by 2. As for MP-Mold, they are serious, professional and responsive sellers.

    102. Brad Glass –

      The quality of this mold is outstanding! Open the mold and they fall out. Shipping is unbelievably fast! I’m in KY had it in 3 days. Only brand I will buy from now on.

    103. Raymond Mcknight –

      Absolutely love it. The best mold I’ve bought

    104. Lars –

      Very nice machining. Have not casted with it yet, but I expect it will do very well. Super fast shipping.

    105. JEAN H. –

      Good morning
      The mold is perfect, easy to use and the cavities are very precise.
      High quality product.
      Transaction perfectly executed.
      I recommend your online store to my acquaintances.
      See you soon .

    106. emilio –

      Excelente molde,muy bien contruido. Tras realizarle el tratamiento termico y coger temperatura, produce puntas de calidad. al ser de 8 orificios, agiliza mucho el trabajo. en una sola sesion, se producen muchas puntas. volveré a comprar en mp molds

    107. Anwar Arendse –

      If MP Molds have what you need, do not hesitate to buy from them, not only is the products top quality, the customer service is impeccable, #mpmolds are the best in the business

    108. Roman –

      Perfect build quality and great productivity with 3 molds. Able to produce 5000 bullets in 3 hours with 2 people

    109. Michael C. –

      Perfekt in der Verarbeitung, top Service! Gerne wieder

    110. Jonas Björk –

      Excellent bullet that will chamber in pretty much any 9mm, even short throated CZ type chambers. Flawless function at 28.6 mm, but may need to be seated down to 27.5 mm for low SD’s. The mold is top notch quality as always.

    111. Wayne H. –

      Very happy with the quality of the mold and the speed of shipping. I have cast with the mold and am very pleased with the ease of casting. Will definitely purchase from M&P again.

    112. David R. –

      High quality mold and fast shipping. I’ll be purchasing more in the future

    113. Andrea Todeschini (verified owner) –

    114. Kevin (verified owner) –

      Fast shipping and beautiful mold and craftsmanship. This is my third Miha mold. Haven’t used this mold yet, but my other two molds drop great hollow point bullets .

    115. Burkhard (verified owner) –

      Mihec did a great job. Beautiful mold and excellent bullets.

    116. Jefferson (verified owner) –

      Never had a brass mold before, worth every penny! Took a bit to get the rhythm down, but it casts better than every other mold I own (I have 17 others). I won’t buy another mold from Lee, Lyman, or RCBS. Made me a lifetime customer! Unbelievably fast shipping!

    117. Piotr Lipiński (verified owner) –

      Idealna, jakość na najwyższym poziome.Gorąco polecam .

    Add a review

    Your email address will not be published. Required fields are marked *

    SKU: 13837 Categories: , , Tags: , , , , , , ,

    Related products