MP 311-410 HP mold (Multi Choice) MP 311-410 HP mold (Multi Choice) 97.60$ (excl. VAT)
359 hammer hollow point mold 359 Hammer mold HP (Multi choice) 97.60$ (excl. VAT)
Sale!

314-640 – 100 gn HP (Multi choice)

97.60$ (excl. VAT)

-20%
  • cast .314 diam with wheel weights alloy (may vary – depends on alloy)
  • 100 grains hollow points
  • 106 grain solid
  • Steel sprue plate
  • Hardened steel alignment pins
  • Allen keys  included
  • RCBS/Lyman top punch  included
  • Use LEE 6 cavity handle or MP mold handles (NOT included)

See our product pictures in gallery

(49 customer reviews)

Free worldwide shipping on all orders over 399€

    Guaranteed Safe Checkout

    • cast .314 diam with wheel weights alloy (may vary – depends on alloy)
    • 100 grains hollow points
    • 106 grain solid
    • Steel sprue plate
    • Hardened steel alignment pins
    • Allen keys  included
    • RCBS/Lyman top punch  included
    • Use LEE 6 cavity handle or MP mold handles (NOT included)

    See our product pictures in gallery

    Additional information

    Brand

    Caliber (As cast)

    Handles included?

    Material

    Number of cavities

    ,

    Pb-Bb-Gc-Hb

    ,

    49 reviews for 314-640 – 100 gn HP (Multi choice)

    1. Joe –

      Beautiful, works for 32 SW Long, 32 H&R and 327 Fed.

    2. Richard C. –

      Beautiful mold. Bought it to cast bullets for my .327 and couldn’t be happier with the results.

    3. Jack –

      Top quality

    4. Bill Wilkins –

      The only issue I have with the MP three molds I purchased is with the E-clips on the guide rods, Using E-clips to keep the guide rods from falling out of the mold is a bad decision in my opinion.
      E-clips are difficult to install, easy to loose, and interfere with each other when changing hollow point pins
      Offering a replacement guide rod with a head would at least provide customers like me with an alternative to E-clips

    5. Barry Uze –

      I bought this mold for a 32-20 revolver. I’ll size down to .312 and put a few grains of 231 or TiteGroup for a fun plinking round. The machine work on this mold is exquisite. Thanks MP!

    6. Tom B. –

      Great bullet for 327 Federal in Single Sevens.

    7. James D. –

      Another beautiful mold from MP. Fast shipping!

    8. Michael Venturino –

      Excellent piece of equipment. Looks good and works perfectly. I couldn’t be happier with it.

    9. Anthony L. –

      MP’s quality is second to none, and their HP system is THE BEST available from any mold maker.
      Time from purchase to delivery is awesome, usually counted in days not weeks.
      “The Golden Age” of casting is today, my friends.

    10. Jim T. –

      I’ve used lee , rcbs , Lyman molds in the past and these are by far my favorite molds to use.

    11. Christophe TSCHANHENZ –

      Très belle qualité. Parfait

    12. Magnar Støyva –

      Perfect for 32 s&w long

    13. Anonymous (verified owner) –

      Beautiful mold. Great quality!

    14. Paul N. –

      Perfect mold, as always from MP Molds.

    15. Anonymous (verified owner) –

      Highest quality mold I own.

    16. Gregory G. –

      This mold throws very accurate bullets. They release easily. Great for my 32 H&R Magnum revolver.

    17. Anonymous (verified owner) –

      Great bullet mold!

    18. Anonymous (verified owner) –

      Makes beautiful bullets.

    19. Anonymous (verified owner) –

      don’t hesitate to buy

    20. John D Hasty –

      Beautiful

    21. Michael –

      High quality molds, always produce great quality bullets

    22. Anonymous (verified owner) –

      Great Value!

    23. Mark H. –

      Another work of art. Received my mold in 6 days. Better service then we get in the states. Haven’t cast with it yet but no reason to believe it won’t be great like the others.

    24. colter roskos (verified owner) –

      love it!

    25. Steve –

      Beautiful mold.

    26. Mercier Laurent –

      Top quality molds.
      Fast shipping.
      Will buy again.

    27. Anonymous (verified owner) –

      Wonderful product

    28. Patrick Graells –

      Last year I rode articles in Handloader Magazine written by Mike Venturino about this MP Bullet Mould for the 32-20 and I was convinced to try one of these: my satisfaction is at the level of my expectations and I recommend it for this caliber. I might try it in the future for other calibers such as the 30 Luger.
      It would be nice if the mold would be delivered in a small soring box.

    29. michael jones –

      Beautifully made as usual, and came very quickly!! Thanks again for a fine mold.

    30. Mercier L. –

      Perfect. Top quality products. Fast shipping. First class service.

    31. Benjamin T. –

      This is my first brass mold and it took a while to get the temperature correct, but once I did it dropped excellent flat point bullets. I only shot few loads and works great in the 32 H&R. Next will be the 32-20.

    32. Anonymous (verified owner) –

      Love it!

    33. John Walters –

      As usual, a great quality mold with what I believe to be the best pin (hollow point) system out there.

    34. Norman A. –

      Excellent mold. Shoots good in SW 16-4 32 Mag & Model 92 32-20. After a little break in only takes a couple of pours and up to temp making perfect bullets. Shipping was hard to believe. Ordered on a Sunday and had the mold 3 days later on Wednesday. Couldn’t be happier.

    35. Jean-Christophe –

      This is the 5th mold that I buy and the quality is always present. The shipment is fast, very good contact. Professional and responsive seller, perfect packaging. I highly recommend this seller.

    36. Anonymous (verified owner) –

      Fine craftsmanship

    37. Mercier L. –

      Perfect for 7,5 Swiss revolver

    38. Anonymous (verified owner) –

      Great!!!

    39. Mike W. –

      Shipping was very fast, this was my sixth mold from this company, all of them are top drawer molds and the bullets performed great. You won’t find better mold then these!!

    40. jerry white –

      Excellent fit and finish

    41. Rodney C. –

      I have a few of these molds.they are some of the best I have used. Better than Lyman and rcbs when I need more it we be m&p molds.they drop real nice bullets

    42. MARK BUTLER –

      GREAT MOULD

    43. Ken Niccum –

      as always top notch mold , got 32 cal hp two cavity, discount got missed but he made good with plenty of spare parts, which I appreciate a lot. This company has it when it comes to customer service, along with top notch products. I will purchase from them again.

    44. Nicholas –

      Love this mold for my 32h&r. Bullets drop good and right at .314″

    45. Ernest –

      Best molds made!

    46. Matthew D. –

      Extremely high quality mold and amazing fast and easy service! These might be the only molds I buy from now on.

    47. Anonymous –

      Bon moule

    48. Mark Halpin (verified owner) –

      I absolutely love every mold I’ve ever bought.And I’ve bought so many id have to count.Only buying elsewhere if what im looking for disconnected or out of stock.Ill buy elsewhere.When back in stock buy MP and give hold over mold to friend.It is the absolute best designed and quality hollow point mold..nob8dy could take them.And improve upon a single thing

    49. Lars H. (verified owner) –

      Very nice mold. Fast delivery also.

    Add a review

    Your email address will not be published. Required fields are marked *

    SKU: 11543 Categories: ,

    Related products